NO.1 As you plan a WLAN upgrade, you have assessed the network requirements and data signatures
of your applications.
One of the popular applications used on your network requires high bandwidth and low to medium
Wi-Fi loss, but can tolerate moderate latency and jitter.
What application matches this description?
A. Voice
B. Email
C. Skype chat
D. Video-on-demand
Answer: D

CWNP Real Questions   CWDP-302 questions   CWDP-302 exam

NO.2 In this question, you will compare the mobility processes of a network that supports
WPA2Personal and WPA2-Enterprise. Assume the use of a 15-character ASCII passphrase for
WPA2Personal and EAP-TTLS/MSCHAPv2 with WPA2-Enterprise. Also, assume that proprietary
roaming protocols are not supported.
When a device transitions from one BSS to another within the same ESS, what step must be
performed in the WPA2-Enterprise transition that are not performed in the WPA2-Personal
transition?
A. Open System Authentication
B. 802.11 Reassociation
C. 802.1X authentication
D. 4-Way Handshake
Answer: C

CWNP Braindumps   CWDP-302 dumps   CWDP-302   CWDP-302 certification   CWDP-302

NO.3 Given: In a site survey deliverable report, you are expected to explain the spectrum
measurements taken at the customer's site. What portion of a spectrum analyzer view can be used to
determine if a given channel is too active for use as the active channel for a new AP?
A. Device list
B. Frame decode
C. Real time FFT
D. Duty cycle
Answer: D

CWNP   CWDP-302 Latest Dumps   CWDP-302 VCE Dumps   CWDP-302

NO.4 As an implementation engineer, you have just received initial design specs from a network
designer for your dual-band 802.11n deployment. The network design documents prescribe the
following data rate configuration for the 2.4 GHz radio: Basic Rates - 5.5, 6, 11, 12 Mbps
Supported Rates -9, 18, 24, 36, 48, and 54 Mbps as well as MCS 0-15
What will result from this design strategy?
A. By disabling support for 1 and 2 Mbps while allowing 5.5 and 11 Mbps, the network will force
802.11b clients to use these higher data rates.
B. Protection mechanisms will always be in use on this network to support 5.5 and 11 Mbps as basic
rates.
C. HR/DSSS (802.11b) stations will not be able to associate to the service set.
D. This configuration violates the IEEE specification that defines 6, 12, and 24 Mbps as mandatory
data rates for 802.11g/n.
Answer: C

CWNP Exam Dumps   CWDP-302 exam prep   CWDP-302

NO.5 When performing an indoor predictive site survey to make the WLAN planning and design cycle
more efficient, what is a best practice for configuration of the simulated APs in the predictive
modeling software?
A. All simulated APs should be set to 20 MHz channels only.
B. Always use the default 2.2 dBi omnidirectional antenna patterns for simulated APs.
C. If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the
expected client devices, such as 25 mW.
D. Defining custom AP and antenna patterns will yield more accurate prediction data than the
preconfiguredvendor AP/antenna combinations.
Answer: C

CWNP Practice Test   CWDP-302   CWDP-302 Study Guide

NO.6 You are creating an outdoor bridge link that spans more than 1000 yards. Which one of the
following antenna types is more likely to be included in the design?
A. Yagi
B. Omni
C. Patch
D. Panel
Answer: A

CWNP Braindumps   CWDP-302 Latest Dumps   CWDP-302   CWDP-302 Exam Tests   CWDP-302 dumps torrent   CWDP-302

As we all know, in the era of the popularity of the Internet, looking for information is a very simple thing. But a lot of information are lack of quality and applicability. Many people find CWNP CWDP-302 exam training materials in the network. But they do not know which to believe. Here, I have to recommend ITCertTest's CWNP CWDP-302 exam training materials. The purchase rate and favorable reception of this material is highest on the internet. ITCertTest's CWNP CWDP-302 exam training materials have a part of free questions and answers that provided for you. You can try it later and then decide to take it or leave. So that you can know the ITCertTest's exam material is real and effective.

ITCertTest exam dumps are written by IT elite who have more than ten years experience, through research and practice. ITCertTest provides you with the latest and the most accurate questions and answers. ITCertTest exists for your success. To choose ITCertTest is to choose your success. If you want to pass CWNP CWDP-302 certification exam, ITCertTest is your unique choice.

CWNP CWDP-302 certification exam is a very difficult test. Even if the exam is very hard, many people still choose to sign up for the exam. As to the cause, CWDP-302 exam is a very important test. For IT staff, not having got the certificate has a bad effect on their job. CWNP CWDP-302 certificate will bring you many good helps and also help you get promoted. In a word, this is a test that will bring great influence on your career. Such important exam, you also want to attend the exam.

Exam Code: CWDP-302
Exam Name: Certified Wireless Design Professional
One year free update, No help, Full refund!
CWDP-302 Exam Prep Total Q&A: 60 Questions and Answers
Last Update: 10-23,2015

CWDP-302 Actual Test Detail: CWDP-302 Exam Prep

ITCertTest offer the latest MB7-702 exam material and high-quality 400-051 pdf questions & answers. Our 1z0-562 VCE testing engine and C-TSCM62-65 study guide can help you pass the real exam. High-quality 1Y0-300 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcerttest.com/CWDP-302_braindumps.html