The quality of ITCertTest product is very good and also have the fastest update rate. If you purchase the training materials we provide, you can pass Cisco certification 400-051 Exam Cram successfully.
Cisco 400-101 Bootcamp is a very hot exam. Although it is difficult to pass the exam, the identification of entry point will make you easy to pass your exam. ITCertTest practice test dumps are your best choice and hit rate is up to 100%. And our exam dumps can help you solve any questions of 400-101 Bootcamp. As long as you carefully study the questions in the dumps, all problems can be solved. Purchasing ITCertTest certification training dumps, we provide you with free updates for a year. Within a year, as long as you want to update the dumps you have, you can get the latest version. Try it and see for yourself.
ITCertTest is a website to provide a targeted training for Cisco certification 400-101 Bootcamp. ITCertTest is also a website which can not only make your expertise to get promoted, but also help you pass Cisco certification 400-101 Bootcamp for just one time. The training materials of ITCertTest are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. Once you select our ITCertTest, we can not only help you pass Cisco certification 400-101 Bootcamp and consolidate their IT expertise, but also have a one-year free after-sale Update Service.
There is no reason to waste your time on a test. If you feel it is difficult to prepare for Cisco 400-051 Exam Cram and need spend a lot of time on it, you had better use ITCertTest test dumps which will help you save lots of time. What's more, ITCertTest exam dumps can guarantee 100% pass your exam. There is no better certification training materials than ITCertTest dumps. Instead of wasting your time on preparing for 400-051 Exam Cram, you should use the time to do significant thing. Therefore, hurry to visit ITCertTest.com to know more details. Miss the opportunity, you will regret it.
Exam Name: CCIE Collaboration
One year free update, No help, Full refund!
400-051 Exam Cram Total Q&A: 331 Questions and Answers
Last Update: 12-20,2015
400-051 Bootcamp Detail: 400-051 Exam Cram
Exam Name: CCIE Routing and Switching Written Exam v5.0
One year free update, No help, Full refund!
400-101 Bootcamp Total Q&A: 779 Questions and Answers
Last Update: 12-20,2015
400-101 Training online Detail: 400-101 Bootcamp
NO.1 A GRE tunnel is down with the error message %TUN-5-RECURDOWN:
Tunnel0
temporarily disabled due to recursive routing error.
Which two options
describe possible causes of the error? (Choose two.)
A. Incorrect destination
IP addresses are configured on the tunnel.
B. There is link flapping on the
tunnel.
C. There is instability in the network due to route flapping.
D.
The tunnel mode and tunnel IP address are misconfigured.
E. The tunnel
destination is being routed out of the tunnel interface.
Answer:
C,E
Cisco 400-101 exam dumps 400-101 original
questions
Explanation:
The %TUN-5-RECURDOWN: Tunnel0 temporarily
disabled due to recursive routing error message
means that the generic
routing encapsulation (GRE) tunnel router has discovered a recursive
routing
problem. This condition is usually due to one of these
causes:
Reference.
http://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-
routingprotocol-eigrp/22327-gre-flap.html
NO.2
Refer to the exhibit.
You must complete the configuration on R1 so that a
maximum of three links can be used and
fragmentation is supported.
Which
additional configuration accomplishes this task?
A. interface Multilink19 ip
address 192.168.1.1 255.255.255.0 ppp multilink ppp multilink group 19
ppp
multilink links minimum 1 ppp multilink links maximum 3 ppp multilink
interleave
B. interface Multilink19 ip address 192.168.1.1 255.255.255.0 ppp
multilink ppp multilink group 19
ppp multilink links maximum 3 ppp multilink
fragment delay 20
C. interface Multilink19 ip address 192.168.1.1
255.255.255.0 ppp multilink ppp multilink group 19
ppp multilink links
maximum 3 ppp multilink fragment delay 20 ppp multilink interleave
D.
interface Multilink19 ip address 192.168.1.1 255.255.255.252 ppp multilink ppp
multilink group 19
ppp multilink links maximum 3 ppp multilink
interleave
Answer: A
Cisco 400-101 Real Questions 400-101 Latest
Dumps
Explanation:
The "ppp multilink interleave" command is needed to
enable link fragmentation and Interleaving
(LFI). The Cisco IOS Link
Fragmentation and Interleaving (LFI) feature uses Multilink PPP (MLP).
MLP
provides a method of splitting, recombining, and sequencing datagrams
across multiple logical data
links. MLP allows packets to be fragmented and
the fragments to be sent at the same time over
multiple point-to-point links
to the same remote address.
ppp multilink links maximum
To limit the
maximum number of links that Multilink PPP (MLP) can dial for dynamic
allocation, use
the ppp multilink links maximum command in interface
configuration
mode.
Reference.
http://www.cisco.com/c/en/us/td/docs/ios/12_2/qos/configuration/guide/fqos_c/qcflfi.html
NO.3
Which two options are EIGRP route authentication encryption modes? (Choose
two.)
A. MD5
B. HMAC-SHA-256bit
C. ESP-AES
D. HMAC-AES
Answer:
A,B
Cisco dumps 400-101 exam simulations
Explanation:
Packets
exchanged between neighbors must be authenticated to ensure that a device
accepts
packets only from devices that have the same preshared authentication
key. Enhanced Interior
Gateway Routing Protocol (EIGRP) authentication is
configurable on a per-interface basis; this means
that packets exchanged
between neighbors connected through an interface are authenticated.
EIGRP
supports message digest algorithm 5 (MD5) authentication to prevent the
introduction of
unauthorized information from unapproved sources. MD5
authentication is defined in RFC 1321.
EIGRP also supports the Hashed Message
Authentication Code-Secure Hash Algorithm-256 (HMAC-
SHA-256) authentication
method.
Reference.
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/configuration/xe-
3s/irexe-3s-book/ire-sha-256.html
NO.4
Assume that the following MAC addresses are used for the bridge ID MAC address
by four
different switches in a network. Which switch will be elected as the
spanning-tree root bridge?
A. SwitchA uses MAC 1000.AA-AA-AA-AA-AA-AA.
B.
SwitchB uses MAC 2000.BB-BB-BB-BB-BB-BB.
C. SwitchC uses MAC
3000.CC-CC-CC-CC-CC-CC.
D. SwitchD uses MAC
4000.DD-DD-DD-DD-DD-DD.
Answer: A
Cisco exam prep 400-101 Dumps
PDF
Explanation:
The switch with the highest switch priority (the lowest
numerical priority value) is elected as the root
switch. If all switches are
configured with the default priority (32768), the switch with the lowest
MAC
address in the VLAN becomes the root
switch.
Reference.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/122_53_se/con
figuration/guide/2960scg/swstp.html
NO.5
Which two statements about the default behavior of IS-IS are true? (Choose
two.)
A. The default IS-IS router type is L1/L2.
B. The default IS-IS
metric type is wide.
C. The default IS-IS interface circuit type is
L1/L2.
D. By default, two IS-IS routers must use the same hello interval and
hold timer in order to become
neighbors.
Answer: A,C
Cisco Training
online 400-101 questions 400-101 demo
NO.6 What is the cause of
ignores and overruns on an interface, when the overall traffic rate of
the
interface is low?
A. a hardware failure of the interface
B. a
software bug
C. a bad cable
D. microbursts of traffic
Answer:
D
Cisco Practice Test 400-101 Exam Tests 400-101
certification
Explanation:
Micro-bursting is a phenomenon where rapid
bursts of data packets are sent in quick succession,
leading to periods of
full line-rate transmission that can overflow packet buffers of the network
stack,
both in network endpoints and routers and switches inside the network.
Symptoms of micro bursts
will manifest in the form of ignores and/ or
overruns (also shown as accumulated in "input error"
counter within show
interface output). This is indicative of receive ring and corresponding
packet
buffer being overwhelmed due to data bursts coming in over extremely
short period of time
(microseconds). You will never see a sustained data
traffic within show interface's "input rate"
counter as they are averaging
bits per second (bps) over 5 minutes by default (way too long to
account for
microbursts). You can understand microbursts from a scenario where a 3-lane
highway
merging into a single lane at rush hour - the capacity burst cannot
exceed the total available
bandwidth (i.e. single lane), but it can saturate
it for a period of time.
Reference.
http://ccieordie.com/?tag=micro-burst
NO.7 In which type of EIGRP
configuration is EIGRP IPv6 VRF-Lite available?
A. stub
B. named
mode
C. classic mode
D. passive
Answer: B
Cisco questions 400-101 Study
Guide 400-101 Exam Dumps
400-051 Real Questions: http://400-051.actualtests.xyz